2010 STaSIS R8 V10 Challenge Extreme Edition

North American VAG performance powerhouse STaSIS Engineering is delighted to launch its incredible flagship Audi R8 V10 Challenge Extreme Edition package into the British market.

The astonishing 710 bhp R8 V10 Challenge Extreme Edition (which debuted on the Audi North America stand at the SEMA show in 2010) is the ultimate representation of the no-compromise philosophy behind the STaSIS brand – a unique blend of cohesive powertrain and dynamic suspension and braking upgrades, which elevate the V10 R8’s performance onto a different plane.

Available now through award-winning VAG specialist and STaSIS distributor APS of Brackley, as well as STaSIS agents across the UK, the key technical features of the sensational STaSIS Engineering Audi R8 V10 Challenge Extreme Edition are as follows:-

* Engine – Eaton / Magnusson TVS 2300 supercharger running 7.5 psi of boost, independent charge cooler system to ensure consistent high power output, CNC billet alloy machined intake plenum for durability and strength, high performance STaSIS ECU remap – performance increases to 710 bhp and 523lb.ft of torque

*Exhaust – 3.0 inch TIG welded stainless steel, cross-flow exhaust system
* Brakes – Alcon 390mm front / 355mm rear with two piece floating discs
* Suspension – Lowering springs to improve handling and give a more aggressive appearance while retaining ride quality
* Wheels – 9.5 x 20 inch ultra-lightweight forged aluminium front, 12 x 20 inch forged aluminium rear with high performance low profile tyres

The STaSIS Audi R8 V10 Challenge Extreme Edition refines the standard base car with additional racing technology for the road, combining a 35% power increase with appropriate dynamic and braking enhancements. Everything STaSIS’s engineers have learned at the racetrack has been distilled into this R8 V10 upgrade package that’s also designed for civilised town driving, yet can accelerate from 0-60 mph in just 3.1 seconds (3.7 stock.)

From concept to production each new STaSIS component is rigorously tested to ensure maximum performance and factory levels of reliability.

The STaSIS Audi R8 V10 Challenge Extreme packages are available now from UK importer APS of Brackley and other STaSIS agents across the UK. Prices start at £45,000 fitted, including VAT @ 20%.

Customers are also able to purchase individual STaSIS Audi R8 V10 Challenge Extreme Edition components from APS of Brackley on a piecemeal basis, with prices available on request.

In Detail

type Professionally Tuned Car
released at 2010 SEMA
built at Summit Point, West Virginia, USA
engine Audi BUJ 90° V10 w/Dry Sump Lubrication
position Mid, Longitudinal
aspiration aton / Magnusson TVS 2300 supercharger
ignition Coil-On-Plug
block material Aluminium Alloy
valvetrain Chain-Driven DOHC 4 Valves per Cyl w/VVT & Variable Intake Manifold
fuel feed FSI Direct Injection
displacement 5204 cc / 317.57 in³
bore 84.5 mm / 3.3 in
stroke 92.8 mm / 3.7 in
compression 12.5:1
power 529.4 kw / 710 bhp
specific output 136.43 bhp per litre
torque 709.1 nm / 523 ft lbs
redline 8700
body / frame Magnesium & Aluminum Body over Aluminum Spaceframe
driven wheels Permanent Quattro 4WD w/Electronic Diffential Lock (EDL)
wheel type ultra-lightweight forged aluminium
front brakes Alcon Discs
rear brakes Alcon Discs
front wheels F 50.8 x 24.1 cm / 20 x 9.5 in
rear wheels R 50.8 x 30.5 cm / 20 x 12 in
f suspension Double Wishbones w/Magnetorheological Dampers
r suspension Double Wishbones w/Magnetorheological Dampers
transmission 6-Speed Manual or 6-Speed R-Tonic i
0 – 60 mph ~3.1 seconds

LEAVE A REPLY

Please enter your comment!
Please enter your name here